novaBBS - rec.woodworking - Re: Motor stalled and won’t start

Re: Motor stalled and won’t start

<b2ac429b-16de-45da-a6c1-b0af8a08688en@googlegroups.com>

https://novabbs.com/interests/article-flat.php?id=7812&group=rec.woodworking#7812

X-Received: by 2002:a37:54f:0:b0:6ba:5369:5c5a with SMTP id 76-20020a37054f000000b006ba53695c5amr21048648qkf.253.1662073391009;
Thu, 01 Sep 2022 16:03:11 -0700 (PDT)
X-Received: by 2002:a05:6830:18d8:b0:638:969c:1eef with SMTP id
v24-20020a05683018d800b00638969c1eefmr13905639ote.49.1662073390755; Thu, 01
Sep 2022 16:03:10 -0700 (PDT)
Path: i2pn2.org!i2pn.org!usenet.blueworldhosting.com!feed1.usenet.blueworldhosting.com!peer02.iad!feed-me.highwinds-media.com!news.highwinds-media.com!news-out.google.com!nntp.google.com!postnews.google.com!google-groups.googlegroups.com!not-for-mail
Newsgroups: rec.woodworking
Date: Thu, 1 Sep 2022 16:03:10 -0700 (PDT)
In-Reply-To: <17109c7867544a55$1$1095335$4296dcc3@news.newsgroupdirect.com>
Injection-Info: google-groups.googlegroups.com; posting-host=2603:7080:a03e:95c6:bd62:fbd2:56bf:d118;
posting-account=IWV5PgoAAAAuVQcM67ApsowMfkLi2IsB
NNTP-Posting-Host: 2603:7080:a03e:95c6:bd62:fbd2:56bf:d118
References: <17109c7867544a55$1$1095335$4296dcc3@news.newsgroupdirect.com>
User-Agent: G2/1.0
MIME-Version: 1.0
Message-ID: <b2ac429b-16de-45da-a6c1-b0af8a08688en@googlegroups.com>
Subject: Re:_Motor_stalled_and_won’t_start
From: teamarr...@eznet.net (DerbyDad03)
Injection-Date: Thu, 01 Sep 2022 23:03:11 +0000
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
X-Received-Bytes: 2137

by: DerbyDad03 - Thu, 1 Sep 2022 23:03 UTC

On Wednesday, August 31, 2022 at 10:45:08 PM UTC-4, Ruth wrote:
> I have an old Craftsman 10 inch electronic radial saw. The model number is 113.197250. It is about 40 years old. When I turned it on it started but then it got caught in the kerf and stalled. The Instruction book says to hit the red reset button on top of the motor. I cannot find a reset button. What shall I do?
>

Before anyone jumps all over me, I know that Ruth is talking about a RAS. In any case
here's some free and easy advice that certainly can't hurt...

Try whacking the motor with a rubber mallet or a 2 x 4. Dust, other debris or a dead spot
have been known to cause 70's vintage Craftsman table saw motors to act like they're
dead. DAMHIKT

I've probably done it 2 or 3 times in the 40-ish years I've had my TS. 1 or 2 whacks
and she starts right up.

Re: Motor stalled and won?t start

<37r2hhh0tm89p7r6o41heu0u4v3kupki8b@4ax.com>

copy mid

https://novabbs.com/interests/article-flat.php?id=7818&group=rec.woodworking#7818

copy link Newsgroups: rec.woodworking

Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-1.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Fri, 02 Sep 2022 02:40:06 +0000
From: markrm...@hotmail.com (Markem618)
Newsgroups: rec.woodworking
Subject: Re: Motor stalled and won???t start
Date: Thu, 01 Sep 2022 21:40:07 -0500
Message-ID: <37r2hhh0tm89p7r6o41heu0u4v3kupki8b@4ax.com>
References: <17109c7867544a55$1$1095335$4296dcc3@news.newsgroupdirect.com> <b2ac429b-16de-45da-a6c1-b0af8a08688en@googlegroups.com>
User-Agent: ForteAgent/8.00.32.1272
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 18
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-1HWc861G5T2oZPzuo+S6elDtA/0a5NKSrm9pNrAuF1SXiidZQ2bl4zI3EHXlupcu1zP3Gk+51QMI5EL!uLcpa82OIUf6kJ5bcfuZwjEIxIrZKAH4kmDbTUHamSvsFL+HjAzmxzNgMWEINqEFuKJOMg==
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40

by: Markem618 - Fri, 2 Sep 2022 02:40 UTC

On Thu, 1 Sep 2022 16:03:10 -0700 (PDT), DerbyDad03
<teamarrows@eznet.net> wrote:

>On Wednesday, August 31, 2022 at 10:45:08 PM UTC-4, Ruth wrote:
>> I have an old Craftsman 10 inch electronic radial saw. The model number is 113.197250. It is about 40 years old. When I turned it on it started but then it got caught in the kerf and stalled. The Instruction book says to hit the red reset button on top of the motor. I cannot find a reset button. What shall I do?
>>
>
>Before anyone jumps all over me, I know that Ruth is talking about a RAS. In any case
>here's some free and easy advice that certainly can't hurt...
>
>Try whacking the motor with a rubber mallet or a 2 x 4. Dust, other debris or a dead spot
>have been known to cause 70's vintage Craftsman table saw motors to act like they're
>dead. DAMHIKT
>
>I've probably done it 2 or 3 times in the 40-ish years I've had my TS. 1 or 2 whacks
>and she starts right up.

Best thing it is very cost effective.

Re: Motor stalled and won’t start

<1DWdnc6Hy81ejI_-nZ2dnZfqn_WdnZ2d@giganews.com>

copy mid

https://novabbs.com/interests/article-flat.php?id=7820&group=rec.woodworking#7820

copy link Newsgroups: rec.woodworking

Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-1.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Fri, 02 Sep 2022 14:22:59 +0000
Date: Fri, 2 Sep 2022 09:22:59 -0500
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:91.0) Gecko/20100101
Thunderbird/91.13.0
Subject: Re:_Motor_stalled_and_won’t_start
Content-Language: en-US
Newsgroups: rec.woodworking
References: <17109c7867544a55$1$1095335$4296dcc3@news.newsgroupdirect.com>
<b2ac429b-16de-45da-a6c1-b0af8a08688en@googlegroups.com>
From: lcb11...@swbelldotnet (Leon)
In-Reply-To: <b2ac429b-16de-45da-a6c1-b0af8a08688en@googlegroups.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Message-ID: <1DWdnc6Hy81ejI_-nZ2dnZfqn_WdnZ2d@giganews.com>
Lines: 17
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-kPRXHI+KgSnL+LgTY0/sLGseAsodz8Da70qyELm9ALCa3jvi4GHiU/XhtIHlDwJnoFDyfkzYY0nMN9t!OOXF/2lk9hKJicIlt70k81j9PAAb/KHEAplv3m0woPVrTutF2nQVPvTXN43OEa9lv8Ff88ye
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40

by: Leon - Fri, 2 Sep 2022 14:22 UTC

On 9/1/2022 6:03 PM, DerbyDad03 wrote:
> On Wednesday, August 31, 2022 at 10:45:08 PM UTC-4, Ruth wrote:
>> I have an old Craftsman 10 inch electronic radial saw. The model number is 113.197250. It is about 40 years old. When I turned it on it started but then it got caught in the kerf and stalled. The Instruction book says to hit the red reset button on top of the motor. I cannot find a reset button. What shall I do?
>>
>
> Before anyone jumps all over me, I know that Ruth is talking about a RAS. In any case
> here's some free and easy advice that certainly can't hurt...
>
> Try whacking the motor with a rubber mallet or a 2 x 4. Dust, other debris or a dead spot
> have been known to cause 70's vintage Craftsman table saw motors to act like they're
> dead. DAMHIKT
>
> I've probably done it 2 or 3 times in the 40-ish years I've had my TS. 1 or 2 whacks
> and she starts right up.

That is ABUSE!!! AND should be reported to the tool authorities. ;~)

Re: Motor stalled and won’t start

<30c708bb-5567-4795-bf0e-1999a53d6751n@googlegroups.com>

copy mid

https://novabbs.com/interests/article-flat.php?id=7824&group=rec.woodworking#7824

copy link Newsgroups: rec.woodworking

X-Received: by 2002:ad4:5e8a:0:b0:499:37fd:cace with SMTP id jl10-20020ad45e8a000000b0049937fdcacemr6808532qvb.25.1662169111576;
Fri, 02 Sep 2022 18:38:31 -0700 (PDT)
X-Received: by 2002:a9d:6292:0:b0:639:3863:7a2 with SMTP id
x18-20020a9d6292000000b00639386307a2mr15684104otk.19.1662169111326; Fri, 02
Sep 2022 18:38:31 -0700 (PDT)
Path: i2pn2.org!i2pn.org!usenet.blueworldhosting.com!feed1.usenet.blueworldhosting.com!peer03.iad!feed-me.highwinds-media.com!news.highwinds-media.com!news-out.google.com!nntp.google.com!postnews.google.com!google-groups.googlegroups.com!not-for-mail
Newsgroups: rec.woodworking
Date: Fri, 2 Sep 2022 18:38:31 -0700 (PDT)
In-Reply-To: <1DWdnc6Hy81ejI_-nZ2dnZfqn_WdnZ2d@giganews.com>
Injection-Info: google-groups.googlegroups.com; posting-host=2603:7080:a03e:95c6:8d4c:ccb7:8427:ceec;
posting-account=IWV5PgoAAAAuVQcM67ApsowMfkLi2IsB
NNTP-Posting-Host: 2603:7080:a03e:95c6:8d4c:ccb7:8427:ceec
References: <17109c7867544a55$1$1095335$4296dcc3@news.newsgroupdirect.com>
<b2ac429b-16de-45da-a6c1-b0af8a08688en@googlegroups.com> <1DWdnc6Hy81ejI_-nZ2dnZfqn_WdnZ2d@giganews.com>
User-Agent: G2/1.0
MIME-Version: 1.0
Message-ID: <30c708bb-5567-4795-bf0e-1999a53d6751n@googlegroups.com>
Subject: Re:_Motor_stalled_and_won’t_start
From: teamarr...@eznet.net (DerbyDad03)
Injection-Date: Sat, 03 Sep 2022 01:38:31 +0000
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
X-Received-Bytes: 2567

by: DerbyDad03 - Sat, 3 Sep 2022 01:38 UTC

On Friday, September 2, 2022 at 10:23:07 AM UTC-4, Leon wrote:
> On 9/1/2022 6:03 PM, DerbyDad03 wrote:
> > On Wednesday, August 31, 2022 at 10:45:08 PM UTC-4, Ruth wrote:
> >> I have an old Craftsman 10 inch electronic radial saw. The model number is 113.197250. It is about 40 years old. When I turned it on it started but then it got caught in the kerf and stalled. The Instruction book says to hit the red reset button on top of the motor. I cannot find a reset button.. What shall I do?
> >>
> >
> > Before anyone jumps all over me, I know that Ruth is talking about a RAS. In any case
> > here's some free and easy advice that certainly can't hurt...
> >
> > Try whacking the motor with a rubber mallet or a 2 x 4. Dust, other debris or a dead spot
> > have been known to cause 70's vintage Craftsman table saw motors to act like they're
> > dead. DAMHIKT
> >
> > I've probably done it 2 or 3 times in the 40-ish years I've had my TS. 1 or 2 whacks
> > and she starts right up.
> That is ABUSE!!! AND should be reported to the tool authorities. ;~)

I raised my table saw the same way I raised my kids and they all turned out fine.

Re: Motor stalled and won’t start

<Pc2cnQcUBa3CGI7-nZ2dnZfqn_qdnZ2d@giganews.com>

copy mid

https://novabbs.com/interests/article-flat.php?id=7827&group=rec.woodworking#7827

copy link Newsgroups: rec.woodworking

Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!1.us.feeder.erje.net!feeder.erje.net!border-1.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-2.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Sat, 03 Sep 2022 16:48:31 +0000
Date: Sat, 3 Sep 2022 11:48:31 -0500
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:91.0) Gecko/20100101
Thunderbird/91.13.0
Subject: Re:_Motor_stalled_and_won’t_start
Content-Language: en-US
Newsgroups: rec.woodworking
References: <17109c7867544a55$1$1095335$4296dcc3@news.newsgroupdirect.com>
<b2ac429b-16de-45da-a6c1-b0af8a08688en@googlegroups.com>
<1DWdnc6Hy81ejI_-nZ2dnZfqn_WdnZ2d@giganews.com>
<30c708bb-5567-4795-bf0e-1999a53d6751n@googlegroups.com>
From: lcb11...@swbelldotnet (Leon)
In-Reply-To: <30c708bb-5567-4795-bf0e-1999a53d6751n@googlegroups.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Message-ID: <Pc2cnQcUBa3CGI7-nZ2dnZfqn_qdnZ2d@giganews.com>
Lines: 24
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-i7ghEBlhm9n3wKc0STels8hyD7jIZDj9uEAyzR6E3vmSer9BXY9wJis48I3RpyfPTh9r6RjNUYfnvuh!jWp+YBnPgDFVG9Ln8Fz6ZqAgpqBo6b8xAa+zwWDCohRL+oMECDAbqPcVVRXCctrNfQqAgmUX
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40

by: Leon - Sat, 3 Sep 2022 16:48 UTC

On 9/2/2022 8:38 PM, DerbyDad03 wrote:
> On Friday, September 2, 2022 at 10:23:07 AM UTC-4, Leon wrote:
>> On 9/1/2022 6:03 PM, DerbyDad03 wrote:
>>> On Wednesday, August 31, 2022 at 10:45:08 PM UTC-4, Ruth wrote:
>>>> I have an old Craftsman 10 inch electronic radial saw. The model number is 113.197250. It is about 40 years old. When I turned it on it started but then it got caught in the kerf and stalled. The Instruction book says to hit the red reset button on top of the motor. I cannot find a reset button. What shall I do?
>>>>
>>>
>>> Before anyone jumps all over me, I know that Ruth is talking about a RAS. In any case
>>> here's some free and easy advice that certainly can't hurt...
>>>
>>> Try whacking the motor with a rubber mallet or a 2 x 4. Dust, other debris or a dead spot
>>> have been known to cause 70's vintage Craftsman table saw motors to act like they're
>>> dead. DAMHIKT
>>>
>>> I've probably done it 2 or 3 times in the 40-ish years I've had my TS. 1 or 2 whacks
>>> and she starts right up.
>> That is ABUSE!!! AND should be reported to the tool authorities. ;~)
>
> I raised my table saw the same way I raised my kids and they all turned out fine.

I know right!!! I am afraid all of the inexperienced people causing a
shift to what was wrong is now right and visa versa will have to live
with their decisions after we are long gone.

Re: Motor stalled and won?t start

<ks87hh19bejod84hke6fumtnenutbg7ju7@4ax.com>

copy mid

https://novabbs.com/interests/article-flat.php?id=7832&group=rec.woodworking#7832

copy link Newsgroups: rec.woodworking

Path: i2pn2.org!i2pn.org!usenet.blueworldhosting.com!feed1.usenet.blueworldhosting.com!peer02.iad!feed-me.highwinds-media.com!news.highwinds-media.com!fx13.iad.POSTED!not-for-mail
From: krw...@notreal.com
Newsgroups: rec.woodworking
Subject: Re: Motor stalled and won???t start
Message-ID: <ks87hh19bejod84hke6fumtnenutbg7ju7@4ax.com>
References: <17109c7867544a55$1$1095335$4296dcc3@news.newsgroupdirect.com> <b2ac429b-16de-45da-a6c1-b0af8a08688en@googlegroups.com> <1DWdnc6Hy81ejI_-nZ2dnZfqn_WdnZ2d@giganews.com> <30c708bb-5567-4795-bf0e-1999a53d6751n@googlegroups.com>
User-Agent: ForteAgent/8.00.32.1272
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 24
X-Complaints-To: abuse@easynews.com
Organization: Forte - www.forteinc.com
X-Complaints-Info: Please be sure to forward a copy of ALL headers otherwise we will be unable to process your complaint properly.
Date: Sat, 03 Sep 2022 14:59:28 -0400
X-Received-Bytes: 2234

by: krw...@notreal.com - Sat, 3 Sep 2022 18:59 UTC

On Fri, 2 Sep 2022 18:38:31 -0700 (PDT), DerbyDad03
<teamarrows@eznet.net> wrote:

>On Friday, September 2, 2022 at 10:23:07 AM UTC-4, Leon wrote:
>> On 9/1/2022 6:03 PM, DerbyDad03 wrote:
>> > On Wednesday, August 31, 2022 at 10:45:08 PM UTC-4, Ruth wrote:
>> >> I have an old Craftsman 10 inch electronic radial saw. The model number is 113.197250. It is about 40 years old. When I turned it on it started but then it got caught in the kerf and stalled. The Instruction book says to hit the red reset button on top of the motor. I cannot find a reset button. What shall I do?
>> >>
>> >
>> > Before anyone jumps all over me, I know that Ruth is talking about a RAS. In any case
>> > here's some free and easy advice that certainly can't hurt...
>> >
>> > Try whacking the motor with a rubber mallet or a 2 x 4. Dust, other debris or a dead spot
>> > have been known to cause 70's vintage Craftsman table saw motors to act like they're
>> > dead. DAMHIKT
>> >
>> > I've probably done it 2 or 3 times in the 40-ish years I've had my TS. 1 or 2 whacks
>> > and she starts right up.
>> That is ABUSE!!! AND should be reported to the tool authorities. ;~)
>
>I raised my table saw the same way I raised my kids and they all turned out fine.

You whacked your kids with a rubber mallet? No wonder they won the
Soapbox Derby. "Lose and it's forty whacks for you!"

Re: Motor stalled and won?t start

<j197hh98pm461ie903okpi53444vahfh02@4ax.com>

copy mid

https://novabbs.com/interests/article-flat.php?id=7833&group=rec.woodworking#7833

copy link Newsgroups: rec.woodworking

Path: i2pn2.org!i2pn.org!weretis.net!feeder8.news.weretis.net!newsreader4.netcologne.de!news.netcologne.de!peer01.ams1!peer.ams1.xlned.com!news.xlned.com!peer03.iad!feed-me.highwinds-media.com!news.highwinds-media.com!fx13.iad.POSTED!not-for-mail
From: krw...@notreal.com
Newsgroups: rec.woodworking
Subject: Re: Motor stalled and won???t start
Message-ID: <j197hh98pm461ie903okpi53444vahfh02@4ax.com>
References: <17109c7867544a55$1$1095335$4296dcc3@news.newsgroupdirect.com> <b2ac429b-16de-45da-a6c1-b0af8a08688en@googlegroups.com> <1DWdnc6Hy81ejI_-nZ2dnZfqn_WdnZ2d@giganews.com> <30c708bb-5567-4795-bf0e-1999a53d6751n@googlegroups.com> <Pc2cnQcUBa3CGI7-nZ2dnZfqn_qdnZ2d@giganews.com>
User-Agent: ForteAgent/8.00.32.1272
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 30
X-Complaints-To: abuse@easynews.com
Organization: Forte - www.forteinc.com
X-Complaints-Info: Please be sure to forward a copy of ALL headers otherwise we will be unable to process your complaint properly.
Date: Sat, 03 Sep 2022 15:01:55 -0400
X-Received-Bytes: 2622

by: krw...@notreal.com - Sat, 3 Sep 2022 19:01 UTC

On Sat, 3 Sep 2022 11:48:31 -0500, Leon <lcb11211@swbelldotnet> wrote:

>On 9/2/2022 8:38 PM, DerbyDad03 wrote:
>> On Friday, September 2, 2022 at 10:23:07 AM UTC-4, Leon wrote:
>>> On 9/1/2022 6:03 PM, DerbyDad03 wrote:
>>>> On Wednesday, August 31, 2022 at 10:45:08 PM UTC-4, Ruth wrote:
>>>>> I have an old Craftsman 10 inch electronic radial saw. The model number is 113.197250. It is about 40 years old. When I turned it on it started but then it got caught in the kerf and stalled. The Instruction book says to hit the red reset button on top of the motor. I cannot find a reset button. What shall I do?
>>>>>
>>>>
>>>> Before anyone jumps all over me, I know that Ruth is talking about a RAS. In any case
>>>> here's some free and easy advice that certainly can't hurt...
>>>>
>>>> Try whacking the motor with a rubber mallet or a 2 x 4. Dust, other debris or a dead spot
>>>> have been known to cause 70's vintage Craftsman table saw motors to act like they're
>>>> dead. DAMHIKT
>>>>
>>>> I've probably done it 2 or 3 times in the 40-ish years I've had my TS. 1 or 2 whacks
>>>> and she starts right up.
>>> That is ABUSE!!! AND should be reported to the tool authorities. ;~)
>>
>> I raised my table saw the same way I raised my kids and they all turned out fine.
>
>
>I know right!!! I am afraid all of the inexperienced people causing a
>shift to what was wrong is now right and visa versa will have to live
>with their decisions after we are long gone.

I'm afraid we'll have to live with their decisions before we're gone.
If they want Communism, give me ten or twenty years to get out of the
way.

Re: Motor stalled and won’t start

<bc0f0a2c-ee0b-4ef2-9090-b360834f9aa6n@googlegroups.com>

copy mid

https://novabbs.com/interests/article-flat.php?id=7839&group=rec.woodworking#7839

copy link Newsgroups: rec.woodworking

X-Received: by 2002:a05:6214:27c7:b0:476:9872:947c with SMTP id ge7-20020a05621427c700b004769872947cmr34195410qvb.114.1662264800655;
Sat, 03 Sep 2022 21:13:20 -0700 (PDT)
X-Received: by 2002:a9d:6a4d:0:b0:638:9c7b:40fe with SMTP id
h13-20020a9d6a4d000000b006389c7b40femr16743604otn.37.1662264800413; Sat, 03
Sep 2022 21:13:20 -0700 (PDT)
Path: i2pn2.org!i2pn.org!usenet.blueworldhosting.com!feed1.usenet.blueworldhosting.com!peer01.iad!feed-me.highwinds-media.com!news.highwinds-media.com!news-out.google.com!nntp.google.com!postnews.google.com!google-groups.googlegroups.com!not-for-mail
Newsgroups: rec.woodworking
Date: Sat, 3 Sep 2022 21:13:20 -0700 (PDT)
In-Reply-To: <ks87hh19bejod84hke6fumtnenutbg7ju7@4ax.com>
Injection-Info: google-groups.googlegroups.com; posting-host=2603:7080:a03e:95c6:c005:c352:d4a4:7bb4;
posting-account=IWV5PgoAAAAuVQcM67ApsowMfkLi2IsB
NNTP-Posting-Host: 2603:7080:a03e:95c6:c005:c352:d4a4:7bb4
References: <17109c7867544a55$1$1095335$4296dcc3@news.newsgroupdirect.com>
<b2ac429b-16de-45da-a6c1-b0af8a08688en@googlegroups.com> <1DWdnc6Hy81ejI_-nZ2dnZfqn_WdnZ2d@giganews.com>
<30c708bb-5567-4795-bf0e-1999a53d6751n@googlegroups.com> <ks87hh19bejod84hke6fumtnenutbg7ju7@4ax.com>
User-Agent: G2/1.0
MIME-Version: 1.0
Message-ID: <bc0f0a2c-ee0b-4ef2-9090-b360834f9aa6n@googlegroups.com>
Subject: Re:_Motor_stalled_and_won’t_start
From: teamarr...@eznet.net (DerbyDad03)
Injection-Date: Sun, 04 Sep 2022 04:13:20 +0000
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
X-Received-Bytes: 3169

by: DerbyDad03 - Sun, 4 Sep 2022 04:13 UTC

On Saturday, September 3, 2022 at 2:59:32 PM UTC-4, k...@notreal.com wrote:
> On Fri, 2 Sep 2022 18:38:31 -0700 (PDT), DerbyDad03
> <teama...@eznet.net> wrote:
>
> >On Friday, September 2, 2022 at 10:23:07 AM UTC-4, Leon wrote:
> >> On 9/1/2022 6:03 PM, DerbyDad03 wrote:
> >> > On Wednesday, August 31, 2022 at 10:45:08 PM UTC-4, Ruth wrote:
> >> >> I have an old Craftsman 10 inch electronic radial saw. The model number is 113.197250. It is about 40 years old. When I turned it on it started but then it got caught in the kerf and stalled. The Instruction book says to hit the red reset button on top of the motor. I cannot find a reset button. What shall I do?
> >> >>
> >> >
> >> > Before anyone jumps all over me, I know that Ruth is talking about a RAS. In any case
> >> > here's some free and easy advice that certainly can't hurt...
> >> >
> >> > Try whacking the motor with a rubber mallet or a 2 x 4. Dust, other debris or a dead spot
> >> > have been known to cause 70's vintage Craftsman table saw motors to act like they're
> >> > dead. DAMHIKT
> >> >
> >> > I've probably done it 2 or 3 times in the 40-ish years I've had my TS. 1 or 2 whacks
> >> > and she starts right up.
> >> That is ABUSE!!! AND should be reported to the tool authorities. ;~)
> >
> >I raised my table saw the same way I raised my kids and they all turned out fine.
> You whacked your kids with a rubber mallet? No wonder they won the
> Soapbox Derby. "Lose and it's forty whacks for you!"

A rubber mallet? No way. I don’t abuse my tools.

Please see option 2 for getting the motor (or kids) started.

Kleeneness is next to Godelness.

interests / rec.woodworking / Re: Motor stalled and won’t start

Subject	Author
Re: Motor stalled and won’t start	DerbyDad03
Re: Motor stalled and won?t start	Markem618
Re: Motor stalled and won’t start	Leon
Re: Motor stalled and won’t start	DerbyDad03
Re: Motor stalled and won’t start	Leon
Re: Motor stalled and won?t start	krw
Re: Motor stalled and won?t start	krw
Re: Motor stalled and won’t start	DerbyDad03