I posted a picture of the serving dish stands that I build with the aid
of the Shaper Origin. Bob wanted to see the stands in action. Here
they are. I built 4, 2 were filled immediately and I suspect 2~4 more
will be ordered.

https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/

In rec.woodworking, Leon <lcb11211@swbelldotnet> wrote:
> I posted a picture of the serving dish stands that I build with the aid
> of the Shaper Origin. Bob wanted to see the stands in action. Here
> they are. I built 4, 2 were filled immediately and I suspect 2~4 more
> will be ordered.
>
> https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/

I, for one, totally misunderstood what you were making and now seeing
it, finally understand.

I thought it was going to be some sort of base for tiered plates to
serve hors d'oeuvres or the like from. When I saw the first photos I
began to get puzzled about how the final design would look.

Elijah
------
"Huh, must be some sort of modern abstract design."

Eli the Bearded <*@eli.users.panix.com> writes:
>In rec.woodworking, Leon <lcb11211@swbelldotnet> wrote:
>> I posted a picture of the serving dish stands that I build with the aid
>> of the Shaper Origin. Bob wanted to see the stands in action. Here
>> they are. I built 4, 2 were filled immediately and I suspect 2~4 more
>> will be ordered.
>>
>> https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/
>
>I, for one, totally misunderstood what you were making and now seeing
>it, finally understand.
>
>I thought it was going to be some sort of base for tiered plates to
>serve hors d'oeuvres or the like from. When I saw the first photos I
>began to get puzzled about how the final design would look.

Yeah, 'plate racks' may have been a more descriptive term.

On 8/17/2021 8:46 AM, Leon wrote:
> I posted a picture of the serving dish stands that I build with the aid
> of the Shaper Origin.  Bob wanted to see the stands in action.  Here
> they are.  I built 4, 2 were filled immediately and I suspect 2~4 more
> will be ordered.
>
> https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/

Something similar might work for pot lids, skillet lids . . .
My wife has way too many sets of dishes and cutesy serving pieces.

Dave in SoTex

On 8/17/2021 12:28 PM, Eli the Bearded wrote:
> In rec.woodworking, Leon <lcb11211@swbelldotnet> wrote:
>> I posted a picture of the serving dish stands that I build with the aid
>> of the Shaper Origin. Bob wanted to see the stands in action. Here
>> they are. I built 4, 2 were filled immediately and I suspect 2~4 more
>> will be ordered.
>>
>> https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/
>
> I, for one, totally misunderstood what you were making and now seeing
> it, finally understand.
>
> I thought it was going to be some sort of base for tiered plates to
> serve hors d'oeuvres or the like from. When I saw the first photos I
> began to get puzzled about how the final design would look.
>
> Elijah
> ------
> "Huh, must be some sort of modern abstract design."
>

;~)

On 8/17/2021 12:30 PM, Scott Lurndal wrote:
> Eli the Bearded <*@eli.users.panix.com> writes:
>> In rec.woodworking, Leon <lcb11211@swbelldotnet> wrote:
>>> I posted a picture of the serving dish stands that I build with the aid
>>> of the Shaper Origin. Bob wanted to see the stands in action. Here
>>> they are. I built 4, 2 were filled immediately and I suspect 2~4 more
>>> will be ordered.
>>>
>>> https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/
>>
>> I, for one, totally misunderstood what you were making and now seeing
>> it, finally understand.
>>
>> I thought it was going to be some sort of base for tiered plates to
>> serve hors d'oeuvres or the like from. When I saw the first photos I
>> began to get puzzled about how the final design would look.
>
> Yeah, 'plate racks' may have been a more descriptive term.
>

Actually serving dish storage/stands is precisely what they are.

Some of the items are NOT plates.

On 8/17/2021 1:56 PM, Dave in SoTex wrote:
> On 8/17/2021 8:46 AM, Leon wrote:
>> I posted a picture of the serving dish stands that I build with the
>> aid of the Shaper Origin.  Bob wanted to see the stands in action.
>> Here they are.  I built 4, 2 were filled immediately and I suspect 2~4
>> more will be ordered.
>>
>> https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/
>
>      Something similar might work for pot lids, skillet lids . . .
> My wife has way too many sets of dishes and cutesy serving pieces.
>
> Dave in SoTex
>

Yes, way to many. Sets for every type of occasion, as if one set would
not work for every occasion. ;~)

But then, I have 11 sanders. ;~0
I use all but 3 regularly.

On Tue, 17 Aug 2021 08:46:03 -0500, Leon <lcb11211@swbelldotnet>
wrote:

>I posted a picture of the serving dish stands that I build with the aid
>of the Shaper Origin. Bob wanted to see the stands in action. Here
>they are. I built 4, 2 were filled immediately and I suspect 2~4 more
>will be ordered.
>
>https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/

What are your wife's dishes doing on your cribbage board?

On Tuesday, August 17, 2021 at 4:36:35 PM UTC-4, Leon wrote:
> On 8/17/2021 1:56 PM, Dave in SoTex wrote:
> > On 8/17/2021 8:46 AM, Leon wrote:
> >> I posted a picture of the serving dish stands that I build with the
> >> aid of the Shaper Origin. Bob wanted to see the stands in action.
> >> Here they are. I built 4, 2 were filled immediately and I suspect 2~4
> >> more will be ordered.
> >>
> >> https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/
> >
> > Something similar might work for pot lids, skillet lids . . .
> > My wife has way too many sets of dishes and cutesy serving pieces.
> >
> > Dave in SoTex
> >
> Yes, way to many. Sets for every type of occasion, as if one set would
> not work for every occasion. ;~)
>
> But then, I have 11 sanders. ;~0
> I use all but 3 regularly.

You use 8 regularly, i.e. you sand with them.

That means you use the other 3 irregularly. What is an irregular use of
a sander? Oh, wait...maybe we don't want to know. :-O

On 8/17/2021 7:53 PM, DerbyDad03 wrote:
> On Tuesday, August 17, 2021 at 4:36:35 PM UTC-4, Leon wrote:
>> On 8/17/2021 1:56 PM, Dave in SoTex wrote:
>>> On 8/17/2021 8:46 AM, Leon wrote:
>>>> I posted a picture of the serving dish stands that I build with the
>>>> aid of the Shaper Origin. Bob wanted to see the stands in action.
>>>> Here they are. I built 4, 2 were filled immediately and I suspect 2~4
>>>> more will be ordered.
>>>>
>>>> https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/
>>>
>>> Something similar might work for pot lids, skillet lids . . .
>>> My wife has way too many sets of dishes and cutesy serving pieces.
>>>
>>> Dave in SoTex
>>>
>> Yes, way to many. Sets for every type of occasion, as if one set would
>> not work for every occasion. ;~)
>>
>> But then, I have 11 sanders. ;~0
>> I use all but 3 regularly.
>
> You use 8 regularly, i.e. you sand with them.
>
> That means you use the other 3 irregularly. What is an irregular use of
> a sander? Oh, wait...maybe we don't want to know. :-O
>

I often ask my wife, did I work hardly or did I hardly work?

On 8/17/2021 5:32 PM, krw@notreal.com wrote:
> On Tue, 17 Aug 2021 08:46:03 -0500, Leon <lcb11211@swbelldotnet>
> wrote:
>
>> I posted a picture of the serving dish stands that I build with the aid
>> of the Shaper Origin. Bob wanted to see the stands in action. Here
>> they are. I built 4, 2 were filled immediately and I suspect 2~4 more
>> will be ordered.
>>
>> https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/
>
> What are your wife's dishes doing on your cribbage board?
>

That was Derby's cribbage board. He will use if for the serving dishes
from his Grand daughters doll house. ;~)

On Wed, 18 Aug 2021 08:41:05 -0500, Leon <lcb11211@swbelldotnet>
wrote:

>On 8/17/2021 7:53 PM, DerbyDad03 wrote:
>> On Tuesday, August 17, 2021 at 4:36:35 PM UTC-4, Leon wrote:
>>> On 8/17/2021 1:56 PM, Dave in SoTex wrote:
>>>> On 8/17/2021 8:46 AM, Leon wrote:
>>>>> I posted a picture of the serving dish stands that I build with the
>>>>> aid of the Shaper Origin. Bob wanted to see the stands in action.
>>>>> Here they are. I built 4, 2 were filled immediately and I suspect 2~4
>>>>> more will be ordered.
>>>>>
>>>>> https://www.flickr.com/photos/lcb11211/51384134396/in/dateposted/
>>>>
>>>> Something similar might work for pot lids, skillet lids . . .
>>>> My wife has way too many sets of dishes and cutesy serving pieces.
>>>>
>>>> Dave in SoTex
>>>>
>>> Yes, way to many. Sets for every type of occasion, as if one set would
>>> not work for every occasion. ;~)
>>>
>>> But then, I have 11 sanders. ;~0
>>> I use all but 3 regularly.
>>
>> You use 8 regularly, i.e. you sand with them.
>>
>> That means you use the other 3 irregularly. What is an irregular use of
>> a sander? Oh, wait...maybe we don't want to know. :-O
>>
>
>I often ask my wife, did I work hardly or did I hardly work?

When we lived in Vermont, I had a 4-wheel drive pickup. I'd tell my
wife not to worry, it's four wheel drive. I can go anywhere when it
snows. It's even an off-road truck so I can even go off the road. It
took her a few times...